|
|
Recovery Ring
Material
16mm Steel wire
Weight
310g
Production process
forging
Surface preparation
de-burr
Surface treatment
light oil
Use
Automotive
Comments
Tow eye for Jaguar Land Rover Evoque
72mm Fill point
Material
Mild Steel and HDPE
Weight
510g
Production process
Casting & Injection moulding
Surface preparation
dipped to clean
Surface treatment
BZP
Use
2" BSP fuel filling point for oil tank
Comments
Low cost alternative to 2" Lockable Fill Point.
72mm Fill point
| Material |
Mild Steel and HDPE |
| Use |
2" BSP fuel filling point for oil tank |
 Additional information
47mm Fill point
Material
BS970-1996
Weight
414g
Production process
Investment casting
Surface preparation
De-burred, dipped
Surface treatment
Chromate
Use
simple fill point for moulding into rotationally moulded fuel tanks
Comments
2"BSP thread, 2 x welded points
47mm Fill point
| Material |
BS970-1996 |
| Use |
simple fill point for moulding into rotationally m... |
Additional information
Dip stick part
Material
BS970-1996
Weight
44g
Production process
CNC machining
Surface preparation
Dipped to clean
Surface treatment
Yellow chromate to BS
Use
An holder for a plastic tube which is used as a dipstick
Comments
Machined from standard bar and anti- oxidant applied
Dip stick part
| Material |
BS970-1996 |
| Use |
An holder for a plastic tube which is used as a di... |
Additional information
Dip stick part
Material
BS970-1996
Weight
53g
Production process
CNC machining
Surface preparation
Dipped to clean
Surface treatment
Yellow chromate to BS
Use
An holder for a plastic tube which is used as a dipstick
Comments
Complete kit to include M4 bolt and Brass split pin
Dip stick part
| Material |
BS970-1996 |
| Use |
An holder for a plastic tube which is used as a di... |
Additional information
Lockable fill point
Material
BS970-1996
Weight
314g
Production process
Investment casting
Surface preparation
Dipped to clean
Surface treatment
Yellow chromate to BS
Use
inner section of 4 part lockable fill point for moulded fuel tanks
Comments
part with anti oxidant applied
Lockable fill point
| Material |
BS970-1996 |
| Use |
inner section of 4 part lockable fill point for mo... |
Additional information
Lockable nut
Material
BS970-1996
Weight
449g
Production process
Investment casting
Surface preparation
Dipped to clean
Surface treatment
Yellow chromate to BS
Use
nut for lockable fill point
Comments
part with anti oxidant applied post machining
Lockable nut
Material
BS970-1996
Weight
449g
Production process
Investment casting
Surface preparation
Dipped to clean
Surface treatment
Yellow chromate to BS
Use
nut for lockable fill point
Comments
part with anti oxidant applied post machining showing groove for O ring
2" Fill cap
Material
BS970-1996
Weight
97g
Production process
Investment casting
Surface preparation
Dipped to clean
Surface treatment
Yellow chromate to BS
Use
cap for lockable fill point
Comments
part with anti oxidant applied
2"BSP lockable fill point. Complete assembly
Material
BS970-1996
Weight
862g
Production process
Investment casting
Surface preparation
Dipped to clean
Surface treatment
Yellow chromate to BS
Use
Fill point for fuel tanks requiring security against theft
Comments
Complete 4 part assembly
2"BSP lockable fill point. Complete assembly
| Material |
BS970-1996 |
| Use |
Fill point for fuel tanks requiring security again... |
Additional information
Bunded Outlet
Material
BS970-1996
Weight
556g
Production process
Investment casting
Surface preparation
Dipped to clean
Surface treatment
Yellow chromate to BS
Use
Fuel outlet for use with bunded rotationally moulded plastic tanks.
Comments
part with anti oxidant applied and threads cut
Bunded Outlet
| Material |
BS970-1996 |
| Use |
Fuel outlet for use with bunded rotationally mould... |
Additional information
Bunded Outlet kit
Material
BS970-1996
Weight
692g
Production process
Investment casting
Surface preparation
Dipped to clean
Surface treatment
Yellow chromate to BS
Use
Fuel outlet for use with bunded rotationally moulded plastic tanks.
Comments
part with anti oxidant applied and supplied with nut and washer
Bunded Outlet kit
| Material |
BS970-1996 |
| Use |
Fuel outlet for use with bunded rotationally mould... |
Additional information
Common connector
Material
BS970-1996
Weight
182g
Production process
Investment casting
Surface preparation
Dipped to clean
Surface treatment
Yellow chromate to BS
Use
Connector for 1" BSP threaded parts
Comments
part with anti oxidant applied and threads cut
1" bunded outlet
Material
BS970-1996
Weight
768g
Production process
Investment casting
Surface preparation
Dipped to clean
Surface treatment
Yellow chromate to BS
Use
Fuel outlet for use with bunded rotationally moulded plastic tanks.
Comments
part with anti oxidant applied and threads cut
1" bunded outlet
| Material |
BS970-1996 |
| Use |
Fuel outlet for use with bunded rotationally mould... |
Additional information
Torsion spring R
Material
BS5216
Weight
7.3kg
Production process
Coiled
Surface preparation
De-burred
Surface treatment
Powder coated
Use
1 of 2 counter wound springs used to assist in lifting waste bin lids
Comments
Right H wound
Torsion spring R
| Material |
BS5216 |
| Use |
1 of 2 counter wound springs used to assist in lif... |
Additional information
Bunded lid pin
Material
BS970-1996
Weight
159g
Production process
CNC machining
Surface preparation
Cleaned for coating
Surface treatment
Powder coated
Use
Part used to secure lid to tank via padlock.
Comments
Machined, drilled, tapped and collar welded
Torsion spring L
Material
BS5216
Weight
7.3kg
Production process
Coiled
Surface preparation
De-burred
Surface treatment
Powder coated
Use
1 of 2 counter wound springs used to assist in lifting waste bin lids
Comments
Left H wound
Torsion spring L
| Material |
BS5216 |
| Use |
1 of 2 counter wound springs used to assist in lif... |
Additional information
Hinge sleeve
Material
0.020 G
Weight
15g
Production process
Rolled
Surface preparation
De-burred
Surface treatment
Galvanised
Use
a metal sleeve to prevent wear in plastic hinges.
Comments
2"BSP lockable fill point. Complete assembly
Material
BS970-1996
Weight
862g
Production process
Investment casting
Surface preparation
Hot dipped
Surface treatment
Galvanised
Use
Fill point for fuel tanks requiring security against theft and with protection against extreme weather
Comments
Complete 4 part assembly
2"BSP lockable fill point. Complete assembly
| Material |
BS970-1996 |
| Use |
Fill point for fuel tanks requiring security again... |
Additional information
Bunded Outlet
Material
N/A
Weight
N/A
Production process
3D modelling
Surface preparation
N/A
Surface treatment
N/A
Use
Prototype produced for customer fit / no fit trial.
Comments
Rapid prototype
Bunded lid pin
Material
BS970-1996
Weight
N/A
Production process
3D modelling
Surface preparation
N/A
Surface treatment
N/A
Use
Prototype produced for customer fit / no fit trial.
Comments
Rapid prototype
Bunded lid pin
| Material |
BS970-1996 |
| Use |
Prototype produced for customer fit / no fit trial. |
Additional information
Wax mold inner 2" fill point
Material
Wax
Weight
N/A
Production process
From mold
Surface preparation
N/A
Surface treatment
N/A
Use
used to build up shell prior to pouring liquid material into mould
Comments
wax prior to water glass treatment
Wax mold inner 2" fill point
| Material |
Wax |
| Use |
used to build up shell prior to pouring liquid mat... |
Additional information
Lockable fill point
Material
BS970-1996
Weight
511
Production process
Investment casting
Surface preparation
N/A
Surface treatment
N/A
Use
inner section of 4 part lockable fill point for moulded fuel tanks
Comments
raw casting of 2" fill point
Lockable fill point
| Material |
BS970-1996 |
| Use |
inner section of 4 part lockable fill point for mo... |
Additional information
Lockable fill point
Material
BS970-1996
Weight
312g
Production process
Investment casting
Surface preparation
N/A
Surface treatment
N/A
Use
inner section of 4 part lockable fill point for moulded fuel tanks
Comments
first stage machining of 2"BSP thread
Lockable fill point
| Material |
BS970-1996 |
| Use |
inner section of 4 part lockable fill point for mo... |
Additional information
Lockable nut
Material
BS970-1996
Weight
446g
Production process
Investment casting
Surface preparation
N/A
Surface treatment
N/A
Use
nut for lockable fill point
Comments
2"BSP thread and interior radius cut
2" Fill cap
Material
BS970-1996
Weight
191g
Production process
Investment casting
Surface preparation
N/A
Surface treatment
N/A
Use
cap for lockable fill point
Comments
raw casting of 2" fill cap
2" Fill cap
Material
BS970-1996
Weight
96g
Production process
Investment casting
Surface preparation
N/A
Surface treatment
N/A
Use
cap for lockable fill point
Comments
post machining of 2" thread
Tank parts group
Material
N/A
Weight
N/A
Production process
N/A
Surface preparation
N/A
Surface treatment
N/A
Use
Fluid handling parts for plastic tanks.
Comments
Various parts for fuel tanks
Newel base fixing
Material
Stainless Steel SS306
Weight
450g
Production process
Stamped and welded
Surface preparation
Sand blasted
Surface treatment
N/A
Use
Base fixing for balcony rail uprights.
Comments
Newel base fixing
| Material |
Stainless Steel SS306 |
| Use |
Base fixing for balcony rail uprights. |
Additional information
1" bunded outlet with connector
Material
BS970-1996
Weight
944g
Production process
Investment casting
Surface preparation
Dipped to clean
Surface treatment
Yellow chromate to BS
Use
Fuel outlet for use with bunded rotationally moulded plastic tanks.
Comments
Complete 2 part assembly
1" bunded outlet with connector
| Material |
BS970-1996 |
| Use |
Fuel outlet for use with bunded rotationally mould... |
Additional information
Conversion bracket
Material
Mild Steel
Weight
n/a
Production process
Fabrication
Surface preparation
Dipped to clean
Surface treatment
BZP coating
Use
Bracket which allows the use of odd size lids to industrial waste containers.
Comments
Fabrication & assembly of 2 x parts + Nyloc nut, bolt and washer set.
Conversion bracket
| Material |
Mild Steel |
| Use |
Bracket which allows the use of odd size lids to i... |
Additional information
Conversion bracket
Material
Mild Steel
Weight
n/a
Production process
Fabrication
Surface preparation
Dipped to clean
Surface treatment
Powder coated
Use
Bracket which allows the use of odd size lids to industrial waste containers.
Comments
Assembly of 3 x parts
Conversion bracket
| Material |
Mild Steel |
| Use |
Bracket which allows the use of odd size lids to i... |
Additional information
Filter bracket
Material
Mild Steel
Weight
170g
Production process
Stamping
Surface preparation
dipped to clean
Surface treatment
Plastic coated
Use
Bracket on to which is clamped a fuel filter
Comments
Stamped then bent
Top hat
Material
Stainless Steel
Weight
318g
Production process
Casting
Surface preparation
Surface treatment
Shot blasted
Use
Retainer for captive bolt
Comments
SS316
Spigot
Material
Mild Steel
Weight
297g
Production process
Casting / fabrication
Surface preparation
dipped to clean
Surface treatment
Plastic coated
Use
Part of fuel station door hinge
Comments
Fabrication
Cleat & stay
Material
Stainless Steel
Weight
n/a
Production process
Casting
Surface preparation
Surface treatment
Mirror polished
Use
For use in yachting
Comments
Nautical
Swing bolt
Material
Mild Steel
Weight
46g
Production process
Casting
Surface preparation
dipped to clean
Surface treatment
Galvanised
Use
Used to de-mould parts from a tool
Comments
Sourced part
|
|
